Filters for filter wheels
Filters with protective rings
The Astronomik filters for filter wheels have no screw threads, but are manufactured with protective rings. The filters have a glass thickness of 1mm and a mechanical thickness of 3mm.
The following diameters are available from stock:
- 31mm
- 36mm
- 50mm
Unmounted filters
The unmounted Astronomik filters have a glass and mechanical thickness of 1mm.
The following sizes are available from stock:
- 27mm diameter
- 42mm diameter
- 50x50mm² (square)
If your application requires filters in special sizes or shapes, we can produce custom filters for your equipment requirements upon request - whether you need a single filter or a larger batch.
Astronomik Deep-Sky RGB Filterset 36mm
Astronomik offers a high-end series of RGB filters: the Astronomik Deep-Sky RGB filters are specifically designed to meet the needs of modern astrophotographers, delivering maximum image quality with all CMOS and CCD cameras. Use the Astronomik Deep-Sky RGB filter set to achieve images with unparalleled sharpness, contrast range, and vibrant colors.These filters are recommended for all modern CMOS and CCD cameras from companies such as ZWO/ASI, QHY, QSI, SBIG, ATIK, and ALTAIR. If you aim to capture the most beautiful images with your equipment, the Astronomik Deep-Sky RGB filters are the perfect choice!The Astronomik Deep-Sky RGB filters are the result of extensive, years-long research and development. We are proud to offer you the best RGB filters currently available for deep-sky imaging. The transmission range of these three filters is designed to allow the important emission lines in deep-sky photography to pass through, providing strong signals and vivid colors. Raw images captured with the Astronomik Deep-Sky RGB filter set can be easily combined into a stunning composite.Feedback from our customers has been extremely positive, mutually reporting smaller, sharper star images compared to conventional filters. This aligns with one of our primary development goals: achieving the highest contrast with pinpoint star images.During the development and testing of the Astronomik Deep-Sky RGB filters, we focused on the sensitivity curves of popular cameras used by modern astrophotographers. Instead of relying on manufacturer specifications, we conducted extensive measurements in our development lab. The result is excellent, balanced color reproduction and the best color contrast with all common sensors. The transmission characteristics and coating technology of the Astronomik Deep-Sky RGB filters ensure that no halos or reflections are visible. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures.In addition to the Astronomik Deep-Sky RGB filters, we offer three different Luminance filters (Astronomik L-1, L-2 and L-3 UV-IR Block). The different transmission ranges of each Luminance filter are designed to match the color correction of different telescopes in order to obtain the sharpest image with any optical design and camera, even with instruments with less-than-perfect color correction. Gallery of images taken with our Astronomik Deep-Sky RGB filters Additional note for photographers and observers under light-polluted skiesFor those working under light-polluted skies, consider using the Astronomik CLS CCD filter instead of a Luminance filter. The Astronomik CLS CCD filter captures luminance signals while effectively blocking high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamp lines, resulting in significantly less background noise. This substitution has been highly praised by customers worldwide, who report the advantages of the Astronomik CLS CCD filter for the luminance channel, making color deep-sky photography feasible in many regions.Suitability of the Astronomik Deep-Sky RGB filtersCMOS and CCD photography: Excellent for deep-sky imagingWebcam and video: Reasonable, used as a color filter for imaging planetsTechnical dataMaximum transmission typically 95% or betterAll Astronomik Deep-Sky RGB filters have IR- and UV-blocking Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block 36mm
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik HSO 6nm Filterset 36mm
Our popular Astronomik Narrowband-Emissionline filters are also available as a budget-friendly HSO filter set. This filter set offers an excellent opportunity to create false-color emission line images similar to those produced by the Hubble Space Telescope.Detailed insights into each Astronomik Narrowband-Emissionline filter’s specific applications can be found here: H-alpha, SII and OIII.The Astronomik H-alpha filter MUST NOT BE USED for solar observation!Difference between Astronomik 12nm and 6nm filtersThe choice between 12nm and 6nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal "best" option - each FWHM serves a specific purpose.The 12nm Astronomik Narrowband-Emissionline filters are better suited for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current or if you are observing from suburban or dark-sky locations. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they generally show more guiding stars compared to the 6nm filter.In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the FWHM does not bring out more details in the object. The 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way, as they typically halve the number of stars in the image compared to the 12nm filter. They are also suitable if you have a camera with very low dark current or if you are observing from a location with extreme light pollution.The Astronomik MFR coatingThe Astronomik MFR coating gives you the best out-of-band blocking over the entire wavelength range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.Technical dataGuaranteed transmission of more than 90% (12nm and 6nm) at the H-alpha line (656nm)Typical transmission of 96% (12nm) and 93% (6nm) at the H-alpha line Guaranteed transmission of more than 90% (12nm and 6nm) at both SII lines (671.7nm and 673.0nm)Typical transmission of 96% (12nm) and 93% (6nm) at both SII linesGuaranteed transmission of more than 90% (12nm) and 88% (6nm) at the major OIII line (501nm)Typical transmission of 95% (12nm) and 92% (6nm) at the major OIII lineGlass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block 50mm
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik Deep-Sky RGB Filterset 50mm
Astronomik offers a high-end series of RGB filters: the Astronomik Deep-Sky RGB filters are specifically designed to meet the needs of modern astrophotographers, delivering maximum image quality with all CMOS and CCD cameras. Use the Astronomik Deep-Sky RGB filter set to achieve images with unparalleled sharpness, contrast range, and vibrant colors.These filters are recommended for all modern CMOS and CCD cameras from companies such as ZWO/ASI, QHY, QSI, SBIG, ATIK, and ALTAIR. If you aim to capture the most beautiful images with your equipment, the Astronomik Deep-Sky RGB filters are the perfect choice!The Astronomik Deep-Sky RGB filters are the result of extensive, years-long research and development. We are proud to offer you the best RGB filters currently available for deep-sky imaging. The transmission range of these three filters is designed to allow the important emission lines in deep-sky photography to pass through, providing strong signals and vivid colors. Raw images captured with the Astronomik Deep-Sky RGB filter set can be easily combined into a stunning composite.Feedback from our customers has been extremely positive, mutually reporting smaller, sharper star images compared to conventional filters. This aligns with one of our primary development goals: achieving the highest contrast with pinpoint star images.During the development and testing of the Astronomik Deep-Sky RGB filters, we focused on the sensitivity curves of popular cameras used by modern astrophotographers. Instead of relying on manufacturer specifications, we conducted extensive measurements in our development lab. The result is excellent, balanced color reproduction and the best color contrast with all common sensors. The transmission characteristics and coating technology of the Astronomik Deep-Sky RGB filters ensure that no halos or reflections are visible. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures.In addition to the Astronomik Deep-Sky RGB filters, we offer three different Luminance filters (Astronomik L-1, L-2 and L-3 UV-IR Block). The different transmission ranges of each Luminance filter are designed to match the color correction of different telescopes in order to obtain the sharpest image with any optical design and camera, even with instruments with less-than-perfect color correction. Gallery of images taken with our Astronomik Deep-Sky RGB filters Additional note for photographers and observers under light-polluted skiesFor those working under light-polluted skies, consider using the Astronomik CLS CCD filter instead of a Luminance filter. The Astronomik CLS CCD filter captures luminance signals while effectively blocking high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamp lines, resulting in significantly less background noise. This substitution has been highly praised by customers worldwide, who report the advantages of the Astronomik CLS CCD filter for the luminance channel, making color deep-sky photography feasible in many regions.Suitability of the Astronomik Deep-Sky RGB filtersCMOS and CCD photography: Excellent for deep-sky imagingWebcam and video: Reasonable, used as a color filter for imaging planetsTechnical dataMaximum transmission typically 95% or betterAll Astronomik Deep-Sky RGB filters have IR- and UV-blocking Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-1 UV-IR Block 36mm
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS CCD 36mm
The Astronomik CLS CCD filter is designed for use with cameras that are intended for astronomical use. It enhances the contrast between all deep-sky objects and the sky background, making it ideal for astrophotography under light polluted skies.Its wider transmission range compared to UHC filters allows a greater amount of light to pass through, resulting in less dimming of stars. The Astronomik CLS CCD filter is optimized to block as much unwanted light as possible while allowing the maximum amount of light from the astronomical objects to pass through. The Astronomik CLS CCD filter completely blocks the emission lines of artificial light sources such as streetlights (e.g. high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps) as well as all lines of natural airglow.The Astronomik CLS CCD filter is suitable for DSLR, CMOS, and CCD cameras and can be used with telescopes or lenses with focal ratios from 1:1.8 to 1:15.The integrated infrared(IR)-blocking layer makes it suitable for use with cameras without their own IR-block filter.30s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS CCD filter. (Canon EOS M3 MC-modified, ISO 1600, Walimex 12/2.0)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.For color images from emission line objects, the Astronomik CLS CCD filter is an excellent choice for the luminance channel.AlternativesFor cameras with an built-in IR cut filter or for visual observation, the Astronomik CLS filter is a more budget-friendly option.Suitability of the Astronomik CLS CCD filtersCMOS and CCD photography: Very good blocking of light-pollutionDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Very good, color balance is close to perfectGallery of images taken with our Astronomik CLS CCD filter Technical Data95% transmission at 486nm (H-beta)95% transmission at 496nm (OIII)95% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 520nm and 640 to 690nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinionMario Spénard: »I want to thank you for your magnificent CLS-CCD. I am using it with a standard unmodified Nikon D610 in a very light polluted area with some really nice result.«
Astronomik OIII 6nm 36mm
The Astronomik OIII filter is ideal for imaging nebulae showing oxygen emissions from both light-polluted and dark observation sites. It significantly enhances the contrast between objects emitting light at 496nm and 501nm (OIII lines) and the sky background. The Astronomik OIII filter completely filters out the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, as well as all lines of natural airglow and most of the distracting moonlight.With a narrow bandwidth of either 12nm, 6nm or 4nm and high transmission rates, the filter effectively blocks all unwanted light from wavelengths other than 496nm and 501nm from ultraviolet (UV) to infrared (IR).In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the Full-Width-Half Maximum (FWHM) does not bring out more details in the object. Imaging with Astronomik Narrowband-Emissionline filtersImaging with Astronomik Narrowband-Emissionline filters is the best way to capture great images from light-polluted sites as they effectively block all kinds of light pollution. An Astronomik H-alpha filter is usually the first step in this field of astrophotography, allowing you to take deep and contrasty images even under heavy light pollution or a full moon. Astronomik H-alpha filters are ideal for imaging all red-glowing nebulae. Astronomik OIII filters expand your imaging possibilities by capturing greenish and blueish structures, making planetary nebulae, star-forming regions and supernova remnants great targets. Completing your filter set with an Astronomik SII filter enables you to create false-color emission line images similar to those produced by the Hubble Space Telescope using the HSO (H-alpha, SII, OIII) palette. Difference between Astronomik OIII 4nm, 6nm and 12nm filters The 4nm and 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way. They are also recommended if you use a camera with very low dark current or if you are observing from a location with extreme light pollution.The 12nm Astronomik Narrowband-Emissionline filters are developed for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they provide more guiding stars.Difference between Astronomik MFR and MaxFR coatingBoth the Astronomik MFR and MaxFR coatings give you the best possible blocking across the entire spectral range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars.12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.4nm MFR-coated filters can be used in all instruments with aperture ratios from f/4.5 to f/15 without significant performance loss.The MaxFR coating is designed to work perfectly with fast optical systems. For 12nm filters with MaxFR coating, this means unlimited usability from f/1.7 to f/6 and approximately 85% of the maximum transmission at a f/1.4.For 6nm filters with MaxFR coating, this means unlimited usability from f/2.2 to f/6 and approximately 90% of the maximum transmission at a f/2.4nm filters with MaxFR coating are currently in development.Filters for even faster optics are available on request.Technical dataGuaranteed transmission of more than 90% (12nm) and 88% (6nm and 4nm) at the major OIII line (501nm)Typical transmission of 95% (12nm) and 92% (6nm and 4nm) at the major OIII line Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik SII 6nm 36mm
The Astronomik SII filter is ideal for imaging nebulae showing sulfur emissions from both light-polluted and dark observation sites. It significantly enhances the contrast between objects emitting light at 671.7nm and 673nm (SII lines) and the sky background. The Astronomik SII filter completely filters out the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, as well as all lines of natural airglow and most of the distracting moonlight.With a narrow bandwidth of either 12nm, 6nm or 4nm and high transmission rates, the filter effectively blocks all unwanted light from wavelengths other than 671.7nm and 673nm from ultraviolet (UV) to infrared (IR).In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the Full-Width-Half Maximum (FWHM) does not bring out more details in the object. Imaging with Astronomik Narrowband-Emissionline filtersImaging with Astronomik Narrowband-Emissionline filters is the best way to capture great images from light-polluted sites as they effectively block all kinds of light pollution. An Astronomik H-alpha filter is usually the first step in this field of astrophotography, allowing you to take deep and contrasty images even under heavy light pollution or a full moon. Astronomik H-alpha filters are ideal for imaging all red-glowing nebulae. Astronomik OIII filters expand your imaging possibilities by capturing greenish and blueish structures, making planetary nebulae, star-forming regions and supernova remnants great targets. Completing your filter set with an Astronomik SII filter enables you to create false-color emission line images similar to those produced by the Hubble Space Telescope using the HSO (H-alpha, SII, OIII) palette. Difference between Astronomik SII 4nm, 6nm and 12nm filters The 4nm and 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way. They are also recommended if you use a camera with very low dark current or if you are observing from a location with extreme light pollution.The 12nm Astronomik Narrowband-Emissionline filters are developed for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they provide more guiding stars.Difference between Astronomik MFR and MaxFR coatingBoth the Astronomik MFR and MaxFR coatings give you the best possible blocking across the entire spectral range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars.12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.4nm MFR-coated filters can be used in all instruments with aperture ratios from f/4.5 to f/15 without significant performance loss.The MaxFR coating is designed to work perfectly with fast optical systems. For 12nm filters with MaxFR coating, this means unlimited usability from f/1.7 to f/6 and approximately 85% of the maximum transmission at a f/1.4.For 6nm filters with MaxFR coating, this means unlimited usability from f/2.2 to f/6 and approximately 90% of the maximum transmission at a f/2.4nm filters with MaxFR coating are currently in development.Filters for even faster optics are available on request.Technical dataGuaranteed transmission of more than 90% (12nm, 6nm and 4nm) at both SII lines (671.7nm and 673.0nm)Typical transmission of 96% (12nm) and 93% (6nm and 4nm) at both SII lines Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik H-alpha 6nm 36mm
The Astronomik H-alpha filter is ideal for imaging hydrogen nebulae from both light-polluted and dark observation sites. It significantly enhances the contrast between objects emitting light at 656nm (H-alpha line) and the sky background. The Astronomik H-alpha filter completely filters out the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, as well as all lines of natural airglow and most of the distracting moonlight.With a narrow bandwidth of either 12nm, 6nm or 4nm and high transmission rates, the filter effectively blocks all unwanted light from wavelengths other than 656nm from ultraviolet (UV) to infrared (IR).In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the Full-Width-Half Maximum (FWHM) does not bring out more details in the object. The Astronomik H-alpha filter MUST NOT BE USED for solar observation!Imaging with Astronomik Narrowband-Emissionline filtersImaging with Astronomik Narrowband-Emissionline filters is the best way to capture great images from light-polluted sites as they effectively block all kinds of light pollution. An Astronomik H-alpha filter is usually the first step in this field of astrophotography, allowing you to take deep and contrasty images even under heavy light pollution or a full moon. Astronomik H-alpha filters are ideal for imaging all red-glowing nebulae. Astronomik OIII filters expand your imaging possibilities by capturing greenish and blueish structures, making planetary nebulae, star-forming regions and supernova remnants great targets. Completing your filter set with an Astronomik SII filter enables you to create false-color emission line images similar to those produced by the Hubble Space Telescope using the HSO (H-alpha, SII, OIII) palette. Difference between Astronomik H-alpha 4nm, 6nm and 12nm filters The 4nm and 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way. They are also recommended if you use a camera with very low dark current or if you are observing from a location with extreme light pollution.The 12nm Astronomik Narrowband-Emissionline filters are developed for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they provide more guiding stars.Difference between Astronomik MFR and MaxFR coatingBoth the Astronomik MFR and MaxFR coatings give you the best possible blocking across the entire spectral range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.4nm MFR-coated filters can be used in all instruments with aperture ratios from f/4.5 to f/15 without significant performance loss.The MaxFR coating is designed to work perfectly with fast optical systems. For 12nm filters with MaxFR coating, this means unlimited usability from f/1.7 to f/6 and approximately 85% of the maximum transmission at a f/1.4.For 6nm filters with MaxFR coating, this means unlimited usability from f/2.2 to f/6 and approximately 90% of the maximum transmission at a f/2.4nm filters with MaxFR coating are currently in development.Filters for even faster optics are available on request.Technical dataGuaranteed transmission of more than 90% (12nm, 6nm and 4nm) at the H-alpha line (656nm)Typical transmission of 96% (12nm) and 93% (6nm and 4nm) at the H-alpha line Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik H-alpha 12nm 36mm
The Astronomik H-alpha filter is ideal for imaging hydrogen nebulae from both light-polluted and dark observation sites. It significantly enhances the contrast between objects emitting light at 656nm (H-alpha line) and the sky background. The Astronomik H-alpha filter completely filters out the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, as well as all lines of natural airglow and most of the distracting moonlight.With a narrow bandwidth of either 12nm, 6nm or 4nm and high transmission rates, the filter effectively blocks all unwanted light from wavelengths other than 656nm from ultraviolet (UV) to infrared (IR).In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the Full-Width-Half Maximum (FWHM) does not bring out more details in the object. The Astronomik H-alpha filter MUST NOT BE USED for solar observation!Imaging with Astronomik Narrowband-Emissionline filtersImaging with Astronomik Narrowband-Emissionline filters is the best way to capture great images from light-polluted sites as they effectively block all kinds of light pollution. An Astronomik H-alpha filter is usually the first step in this field of astrophotography, allowing you to take deep and contrasty images even under heavy light pollution or a full moon. Astronomik H-alpha filters are ideal for imaging all red-glowing nebulae. Astronomik OIII filters expand your imaging possibilities by capturing greenish and blueish structures, making planetary nebulae, star-forming regions and supernova remnants great targets. Completing your filter set with an Astronomik SII filter enables you to create false-color emission line images similar to those produced by the Hubble Space Telescope using the HSO (H-alpha, SII, OIII) palette. Difference between Astronomik H-alpha 4nm, 6nm and 12nm filters The 4nm and 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way. They are also recommended if you use a camera with very low dark current or if you are observing from a location with extreme light pollution.The 12nm Astronomik Narrowband-Emissionline filters are developed for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they provide more guiding stars.Difference between Astronomik MFR and MaxFR coatingBoth the Astronomik MFR and MaxFR coatings give you the best possible blocking across the entire spectral range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.4nm MFR-coated filters can be used in all instruments with aperture ratios from f/4.5 to f/15 without significant performance loss.The MaxFR coating is designed to work perfectly with fast optical systems. For 12nm filters with MaxFR coating, this means unlimited usability from f/1.7 to f/6 and approximately 85% of the maximum transmission at a f/1.4.For 6nm filters with MaxFR coating, this means unlimited usability from f/2.2 to f/6 and approximately 90% of the maximum transmission at a f/2.4nm filters with MaxFR coating are currently in development.Filters for even faster optics are available on request.Technical dataGuaranteed transmission of more than 90% (12nm, 6nm and 4nm) at the H-alpha line (656nm)Typical transmission of 96% (12nm) and 93% (6nm and 4nm) at the H-alpha line Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik Dark-Filter 31mm
With this “filter” you can close an opening in filter wheels light-tight. This allows you to create dark images with cameras without their own shutter and to realize a “park” position of a filter wheel.The Astronomik Dark-Filters fit perfectly in all filter wheels of the brands ZWO, QHY, QSI, Starlight Xpress, SBIG, Moravian and Atik.
Astronomik Dark-Filter 36mm
With this “filter” you can close an opening in filter wheels light-tight. This allows you to create dark images with cameras without their own shutter and to realize a “park” position of a filter wheel.The Astronomik Dark-Filters fit perfectly in all filter wheels of the brands ZWO, QHY, QSI, Starlight Xpress, SBIG, Moravian and Atik.
Astronomik HSO 6nm Filterset 50mm
Our popular Astronomik Narrowband-Emissionline filters are also available as a budget-friendly HSO filter set. This filter set offers an excellent opportunity to create false-color emission line images similar to those produced by the Hubble Space Telescope.Detailed insights into each Astronomik Narrowband-Emissionline filter’s specific applications can be found here: H-alpha, SII and OIII.The Astronomik H-alpha filter MUST NOT BE USED for solar observation!Difference between Astronomik 12nm and 6nm filtersThe choice between 12nm and 6nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal "best" option - each FWHM serves a specific purpose.The 12nm Astronomik Narrowband-Emissionline filters are better suited for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current or if you are observing from suburban or dark-sky locations. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they generally show more guiding stars compared to the 6nm filter.In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the FWHM does not bring out more details in the object. The 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way, as they typically halve the number of stars in the image compared to the 12nm filter. They are also suitable if you have a camera with very low dark current or if you are observing from a location with extreme light pollution.The Astronomik MFR coatingThe Astronomik MFR coating gives you the best out-of-band blocking over the entire wavelength range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.Technical dataGuaranteed transmission of more than 90% (12nm and 6nm) at the H-alpha line (656nm)Typical transmission of 96% (12nm) and 93% (6nm) at the H-alpha line Guaranteed transmission of more than 90% (12nm and 6nm) at both SII lines (671.7nm and 673.0nm)Typical transmission of 96% (12nm) and 93% (6nm) at both SII linesGuaranteed transmission of more than 90% (12nm) and 88% (6nm) at the major OIII line (501nm)Typical transmission of 95% (12nm) and 92% (6nm) at the major OIII lineGlass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik ProPlanet 742 31mm
The Astronomik ProPlanet 742 filter is ideal for imaging the moon and planets, particularly Mars, with telescopes of 6" (150mm) aperture and larger. The filter only allows infrared (IR) light with wavelengths longer than 742nm to pass through, significantly reducing the effects of seeing compared to the visible spectrum. This results in much sharper images than typically expected from your equipment and location. Additionally, the filter effectively darkens the sky background during advanced dawn, enabling photography of planets and the moon even in daylight conditions. Jupiter, imaged with Astronomik L-RGB Type 2c filters (left) and Astronomik ProPlanet 742 filter (right)Comparing sharpness in IR-R-G-B at SaturnComparing L-RGB versus IR-RGB at SaturnOther usesBesides astrophotography, the filter provides stunning results in nature photography. When used as an EOS Clip-Filter in an MC or Full Spectrum modified DSLR, the filter cuts off the part of the spectrum where chlorophyll appears green and shows its high reflectivity in the near infrared. This creates stunning images of flora, with white trees and clouds against a nearly black background when photographed under blue skies in spring and summer.It darkens the sky background during twilight.It enables imaging of young stars in dust clouds and stellar nurseries.AlternativesIf the seeing is an issue and the instrument is 10" (250mm) or larger, the Astronomik ProPlanet 807 filter may be a better choice.Suitability of the Astronomik ProPlanet 742 filtersVisual observation: Unsuitable, the eye is insensitive to this spectral regionCMOS and CCD photography: Reasonable for special IR-photography, such as imaging chlorophyll or star-forming regionsDSLR photography (original): UnsuitableDSLR photography (astro-modified): UnsuitableDSLR photography (MC-modified): Very good for IR daylight photographyWebcam and video (planets): Very good, effectively rejects seeing problemsTechnical dataMore than 96% transmission for wavelengths between 742nm and 1100nmBlocking of wavelengths between 350nm and 730nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik Deep-Sky RGB Filterset 50 x 50mm², unmounted
Astronomik offers a high-end series of RGB filters: the Astronomik Deep-Sky RGB filters are specifically designed to meet the needs of modern astrophotographers, delivering maximum image quality with all CMOS and CCD cameras. Use the Astronomik Deep-Sky RGB filter set to achieve images with unparalleled sharpness, contrast range, and vibrant colors.These filters are recommended for all modern CMOS and CCD cameras from companies such as ZWO/ASI, QHY, QSI, SBIG, ATIK, and ALTAIR. If you aim to capture the most beautiful images with your equipment, the Astronomik Deep-Sky RGB filters are the perfect choice!The Astronomik Deep-Sky RGB filters are the result of extensive, years-long research and development. We are proud to offer you the best RGB filters currently available for deep-sky imaging. The transmission range of these three filters is designed to allow the important emission lines in deep-sky photography to pass through, providing strong signals and vivid colors. Raw images captured with the Astronomik Deep-Sky RGB filter set can be easily combined into a stunning composite.Feedback from our customers has been extremely positive, mutually reporting smaller, sharper star images compared to conventional filters. This aligns with one of our primary development goals: achieving the highest contrast with pinpoint star images.During the development and testing of the Astronomik Deep-Sky RGB filters, we focused on the sensitivity curves of popular cameras used by modern astrophotographers. Instead of relying on manufacturer specifications, we conducted extensive measurements in our development lab. The result is excellent, balanced color reproduction and the best color contrast with all common sensors. The transmission characteristics and coating technology of the Astronomik Deep-Sky RGB filters ensure that no halos or reflections are visible. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures.In addition to the Astronomik Deep-Sky RGB filters, we offer three different Luminance filters (Astronomik L-1, L-2 and L-3 UV-IR Block). The different transmission ranges of each Luminance filter are designed to match the color correction of different telescopes in order to obtain the sharpest image with any optical design and camera, even with instruments with less-than-perfect color correction. Gallery of images taken with our Astronomik Deep-Sky RGB filters Additional note for photographers and observers under light-polluted skiesFor those working under light-polluted skies, consider using the Astronomik CLS CCD filter instead of a Luminance filter. The Astronomik CLS CCD filter captures luminance signals while effectively blocking high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamp lines, resulting in significantly less background noise. This substitution has been highly praised by customers worldwide, who report the advantages of the Astronomik CLS CCD filter for the luminance channel, making color deep-sky photography feasible in many regions.Suitability of the Astronomik Deep-Sky RGB filtersCMOS and CCD photography: Excellent for deep-sky imagingWebcam and video: Reasonable, used as a color filter for imaging planetsTechnical dataMaximum transmission typically 95% or betterAll Astronomik Deep-Sky RGB filters have IR- and UV-blocking Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block 31mm
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-3 UV-IR Block 36mm
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block 50 x 50mm², unmounted
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik ProPlanet 742 36mm
The Astronomik ProPlanet 742 filter is ideal for imaging the moon and planets, particularly Mars, with telescopes of 6" (150mm) aperture and larger. The filter only allows infrared (IR) light with wavelengths longer than 742nm to pass through, significantly reducing the effects of seeing compared to the visible spectrum. This results in much sharper images than typically expected from your equipment and location. Additionally, the filter effectively darkens the sky background during advanced dawn, enabling photography of planets and the moon even in daylight conditions. Jupiter, imaged with Astronomik L-RGB Type 2c filters (left) and Astronomik ProPlanet 742 filter (right)Comparing sharpness in IR-R-G-B at SaturnComparing L-RGB versus IR-RGB at SaturnOther usesBesides astrophotography, the filter provides stunning results in nature photography. When used as an EOS Clip-Filter in an MC or Full Spectrum modified DSLR, the filter cuts off the part of the spectrum where chlorophyll appears green and shows its high reflectivity in the near infrared. This creates stunning images of flora, with white trees and clouds against a nearly black background when photographed under blue skies in spring and summer.It darkens the sky background during twilight.It enables imaging of young stars in dust clouds and stellar nurseries.AlternativesIf the seeing is an issue and the instrument is 10" (250mm) or larger, the Astronomik ProPlanet 807 filter may be a better choice.Suitability of the Astronomik ProPlanet 742 filtersVisual observation: Unsuitable, the eye is insensitive to this spectral regionCMOS and CCD photography: Reasonable for special IR-photography, such as imaging chlorophyll or star-forming regionsDSLR photography (original): UnsuitableDSLR photography (astro-modified): UnsuitableDSLR photography (MC-modified): Very good for IR daylight photographyWebcam and video (planets): Very good, effectively rejects seeing problemsTechnical dataMore than 96% transmission for wavelengths between 742nm and 1100nmBlocking of wavelengths between 350nm and 730nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik Dark-Filter 50mm
With this “filter” you can close an opening in filter wheels light-tight. This allows you to create dark images with cameras without their own shutter and to realize a “park” position of a filter wheel.The Astronomik Dark-Filters fit perfectly in all filter wheels of the brands ZWO, QHY, QSI, Starlight Xpress, SBIG, Moravian and Atik.
Astronomik HSO 6nm Filterset 31mm
Our popular Astronomik Narrowband-Emissionline filters are also available as a budget-friendly HSO filter set. This filter set offers an excellent opportunity to create false-color emission line images similar to those produced by the Hubble Space Telescope.Detailed insights into each Astronomik Narrowband-Emissionline filter’s specific applications can be found here: H-alpha, SII and OIII.The Astronomik H-alpha filter MUST NOT BE USED for solar observation!Difference between Astronomik 12nm and 6nm filtersThe choice between 12nm and 6nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal "best" option - each FWHM serves a specific purpose.The 12nm Astronomik Narrowband-Emissionline filters are better suited for use with typical DSLR cameras with CMOS sensors and CCD cameras with normal or high dark current or if you are observing from suburban or dark-sky locations. They are also the preferred choice for cameras with an integrated or dual guiding sensor, as they generally show more guiding stars compared to the 6nm filter.In areas with little light pollution, the background signal in images is usually limited by the sensor's dark current rather than light pollution. Therefore, further suppression of the sky background by reduction of the FWHM does not bring out more details in the object. The 6nm Astronomik Narrowband-Emissionline filters are ideal for imaging faint objects in star-crowded regions of the milky way, as they typically halve the number of stars in the image compared to the 12nm filter. They are also suitable if you have a camera with very low dark current or if you are observing from a location with extreme light pollution.The Astronomik MFR coatingThe Astronomik MFR coating gives you the best out-of-band blocking over the entire wavelength range from UV to IR, extremely high contrast, minimized stray light, no halos and needle-sharp stars. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/∞ without significant performance loss.6nm MFR-coated filters can be used in all instruments with aperture ratios from f/4 to f/∞ without significant performance loss.Technical dataGuaranteed transmission of more than 90% (12nm and 6nm) at the H-alpha line (656nm)Typical transmission of 96% (12nm) and 93% (6nm) at the H-alpha line Guaranteed transmission of more than 90% (12nm and 6nm) at both SII lines (671.7nm and 673.0nm)Typical transmission of 96% (12nm) and 93% (6nm) at both SII linesGuaranteed transmission of more than 90% (12nm) and 88% (6nm) at the major OIII line (501nm)Typical transmission of 95% (12nm) and 92% (6nm) at the major OIII lineGlass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik Deep-Sky RGB Filterset 31mm
Astronomik offers a high-end series of RGB filters: the Astronomik Deep-Sky RGB filters are specifically designed to meet the needs of modern astrophotographers, delivering maximum image quality with all CMOS and CCD cameras. Use the Astronomik Deep-Sky RGB filter set to achieve images with unparalleled sharpness, contrast range, and vibrant colors.These filters are recommended for all modern CMOS and CCD cameras from companies such as ZWO/ASI, QHY, QSI, SBIG, ATIK, and ALTAIR. If you aim to capture the most beautiful images with your equipment, the Astronomik Deep-Sky RGB filters are the perfect choice!The Astronomik Deep-Sky RGB filters are the result of extensive, years-long research and development. We are proud to offer you the best RGB filters currently available for deep-sky imaging. The transmission range of these three filters is designed to allow the important emission lines in deep-sky photography to pass through, providing strong signals and vivid colors. Raw images captured with the Astronomik Deep-Sky RGB filter set can be easily combined into a stunning composite.Feedback from our customers has been extremely positive, mutually reporting smaller, sharper star images compared to conventional filters. This aligns with one of our primary development goals: achieving the highest contrast with pinpoint star images.During the development and testing of the Astronomik Deep-Sky RGB filters, we focused on the sensitivity curves of popular cameras used by modern astrophotographers. Instead of relying on manufacturer specifications, we conducted extensive measurements in our development lab. The result is excellent, balanced color reproduction and the best color contrast with all common sensors. The transmission characteristics and coating technology of the Astronomik Deep-Sky RGB filters ensure that no halos or reflections are visible. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures.In addition to the Astronomik Deep-Sky RGB filters, we offer three different Luminance filters (Astronomik L-1, L-2 and L-3 UV-IR Block). The different transmission ranges of each Luminance filter are designed to match the color correction of different telescopes in order to obtain the sharpest image with any optical design and camera, even with instruments with less-than-perfect color correction. Gallery of images taken with our Astronomik Deep-Sky RGB filters Additional note for photographers and observers under light-polluted skiesFor those working under light-polluted skies, consider using the Astronomik CLS CCD filter instead of a Luminance filter. The Astronomik CLS CCD filter captures luminance signals while effectively blocking high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamp lines, resulting in significantly less background noise. This substitution has been highly praised by customers worldwide, who report the advantages of the Astronomik CLS CCD filter for the luminance channel, making color deep-sky photography feasible in many regions.Suitability of the Astronomik Deep-Sky RGB filtersCMOS and CCD photography: Excellent for deep-sky imagingWebcam and video: Reasonable, used as a color filter for imaging planetsTechnical dataMaximum transmission typically 95% or betterAll Astronomik Deep-Sky RGB filters have IR- and UV-blocking Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-RGB Type 2c Filterset 31mm
The Astronomik L-RGB Type 2c filter set is specially designed for astrophotography with CCD cameras, enabling natural color reproduction of planets, stars, emission nebulae, and reflection nebulae. It features highest transmission rates for short exposure times.Both stars and objects emitting light in spectral lines are shown in their true colors, as if the objects were bright enough to be seen with photopic vision. This distinctive feature sets Astronomik filters apart from others. The Astronomik L-RGB Type 2c filter set divides the spectrum into its components: red, green, blue, and luminance. This allows for color separation with pure b/w CCD sensors, corresponding to the color sensitivity of the human eye according to DIN 5032. Astronomik focuses not just on capturing images but also on providing astrophotographers with a tool that facilitates a simple and elegant editing process. To maintain color accuracy, the Astronomik L-RGB Type 2c filter set is designed on the base of the sRGB color space, which is an industry standard used by most manufacturers of monitors, printers, and imaging software. AlternativesIf you want to take great deep-sky images with a modern CMOS or CCD camera from brands like ZWO/ASI, QHY, QSI, SBIG, ATIK, and ALTAIR, we recommend our Astronomik Deep-Sky RGB filter set.Suitability of the Astronomik L-RGB Type 2c filtersCMOS and CCD photography: Good color separation for RGB and L-RGB imagesWebcam and video: Excellent, used as a color filter for imaging planetsTechnical dataTypical transmission of 95-97%Suitable for all focal ratiosAll Astronomik L-RGB Type 2c filters have IR- and UV-blocking Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.