Available sizes of Astronomik filters
Astronomik filters come in a wide range of standard sizes, both mounted and unmounted, to suit various optical setups and cameras. You can find the available sizes for each specific filter on its product page. If you need a custom size, we also offer special sizes upon request.
We offer all Astronomik filters in the following sizes from stock:
Mounted filters in threaded cells
- 1.25" cell (M28.5x0.6 thread)
- 2" cell (M48x0.75 thread)
- SC Rear Cell (2" SC-thread / 24TPI)
- T-mount (T-thread, M42x0.75)
Filters for filter wheels – Filters with protective rings
no screw thread, with protective rings (glass thickness: 1mm, mechanical thickness: 3mm)
- 31mm diameter
- 36mm diameter
- 50mm diameter
Unmounted filters
glass and mechanical thickness: 1mm
- 27mm diameter
- 42mm diameter
- 50x50mm² (square)
Photographic lens filters (threaded)
usually available within one week upon request
- M49
- M52
- M55
- M58
- M62
- M67
- M72
- M77
Astronomik H-alpha 12nm Clip-Filter Sony alpha 7
The Astronomik H-alpha filter is ideal for imaging HII regions from both light-polluted and dark observation sites. The Astronomik H-alpha filter significantly enhances the contrast between objects emitting light at 656nm (H-alpha line) and the sky background, allowing for long exposure times for deep and high-contrast images. The filter blocks the emission lines of high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, the maxima of typical LED lights, most lines of natural airglow, as well as most of the distracting moonlight. The Astronomik H-alpha filter effectively blocks all unwanted light from wavelengths other than 656nm, from ultraviolet (UV) to infrared (IR). The Astronomik H-alpha filter MUST NOT BE USED for solar observation! Difference between Astronomik 12nm, 6nm and 4nm filters The choice between 12nm, 6nm and 4nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal “best” option - each FWHM serves a specific purpose. The 12nm Astronomik Narrowband-Emissionline filters are optimized for use with system cameras with CMOS sensors. They are also a good choice for CCD cameras with normal or high dark current. The 12nm filters are also the preferred choice for cameras with an integrated or dual guiding sensor, as they show more guiding stars compared to filters with 6nm or 4nm FWHM. The 12nm filters are the most affordable way to get started with Narrowband-Emissionline filters. Usually, the background signal in images taken from suburban or dark-sky locations is limited by the sensor’s dark current rather than light pollution. Therefore, further suppression of the sky background by reducing the FWHM does not reveal more details of the object. The Astronomik MFR coating Both the Astronomik MFR and MaxFR coatings offer extremely high contrast, minimized stray light, no halos and needle-sharp stars. In addition, they provide the best possible blocking across the entire spectral range from UV to IR. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/15 without visible performance loss. Clip-Filters for Sony Alpha 7 and Alpha 9 cameras Sony Alpha 7 and Alpha 9 cameras are an excellent choice for astrophotography. With Astronomik Clip-Filters, you can use our full range of filters with your camera to capture stunning images. Whether paired with a camera lens or a telescope, our Clip-Filters ensure maximum image quality and performance from your setup. The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers: Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night. All lens functions, such as focus, aperture, and image stabilization remain fully functional. The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass. The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes. Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers: Large filters for large camera lenses are very expensive. Using a filter holder between the camera body and the lens prevents focusing to infinity. For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi “Epsilon” astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed. Long exposure times lead to dust settling on the camera’s sensor chip. Due to the very tight Sony bayonet and the limited space inside the camera, the Astronomik Sony Alpha 7 Clip-Filters cause a minimal obstruction in the corners. But this can be easily corrected by flatfielding. Additionally, all Astronomik Sony Alpha 7 Clip-Filters serve as an excellent dust shield, protecting the sensor during long exposures. If you only need a dust shield without filtering effects, the Astronomik MC-Clear Sony Alpha 7 Clip-Filter is the right choice. NOTE: Please store the Clip-Filter in the supplied storage box and do not leave it in the camera permanently. Use Astronomik filters for your Sony Alpha 7 or Alpha 9 camera and enjoy marvelous images with ultra-light equipment! Compatible Sony Alpha cameras Model Compatibility Sony Alpha 7 Sony Alpha 7 Mk II Sony Alpha 7 Mk III Sony Alpha 7 Mk IV Sony Alpha 7 Mk V Sony Alpha 7C Sony Alpha 7C Mk II Sony Alpha 7CR Sony Alpha 7R Sony Alpha 7R Mk II Sony Alpha 7R Mk III Sony Alpha 7R Mk IV Sony Alpha 7R Mk V Sony Alpha 7S Sony Alpha 7S Mk II Sony Alpha 7S Mk III Sony Alpha 9 Sony Alpha 9 Mk II Sony Alpha 9 Mk III Sony Alpha 58 Sony Alpha 68 Sony Alpha 77 (all variants) Sony Alpha 99 (all variants) Sony Alpha 6000 Sony DSLR cameras with A-bayonet Non-compatible lenses Model Compatibility Sigma 14mm F1.4 DG DN Art Sony FE 12-24mm f2.8 GM (SEL1224GM) Technical Data Guaranteed transmission of more than 90% at the H-alpha line (656nm) Typical transmission of 96% at the H-alpha line Full-Width-Half Maximum (FWHM): 12nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters) Finely polished optical glass, free of any striae, residual stresses, and bubbles Extremely scratch-resistant and durable coating Completely resistant against high humidity and aging effects Astronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters) Parfocal with other Astronomik filters Diffraction-limited Optimized spectral windows Delivered in a high-quality, long-lasting filter box Made in Germany Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Thanks to the high-precision machining of the glas substrate, all Astronomik filters are parfocal. The wedge errors are far below all common tolerances. Therefore, all issues concerning focal distances and the exact alignment of images from each color channel are effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR and MaxFR coatings are designed for optimal performance across a wide range of focal ratios of the optics used. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios for best performance of that specific filter.
Astronomik H-alpha 12nm Clip-Filter Nikon Z XL
The Astronomik H-alpha filter is ideal for imaging HII regions from both light-polluted and dark observation sites. The Astronomik H-alpha filter significantly enhances the contrast between objects emitting light at 656nm (H-alpha line) and the sky background, allowing for long exposure times for deep and high-contrast images. The filter blocks the emission lines of high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, the maxima of typical LED lights, most lines of natural airglow, as well as most of the distracting moonlight. The Astronomik H-alpha filter effectively blocks all unwanted light from wavelengths other than 656nm, from ultraviolet (UV) to infrared (IR). The Astronomik H-alpha filter MUST NOT BE USED for solar observation! Difference between Astronomik 12nm, 6nm and 4nm filters The choice between 12nm, 6nm and 4nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal “best” option - each FWHM serves a specific purpose. The 12nm Astronomik Narrowband-Emissionline filters are optimized for use with system cameras with CMOS sensors. They are also a good choice for CCD cameras with normal or high dark current. The 12nm filters are also the preferred choice for cameras with an integrated or dual guiding sensor, as they show more guiding stars compared to filters with 6nm or 4nm FWHM. The 12nm filters are the most affordable way to get started with Narrowband-Emissionline filters. Usually, the background signal in images taken from suburban or dark-sky locations is limited by the sensor’s dark current rather than light pollution. Therefore, further suppression of the sky background by reducing the FWHM does not reveal more details of the object. The Astronomik MFR coating Both the Astronomik MFR and MaxFR coatings offer extremely high contrast, minimized stray light, no halos and needle-sharp stars. In addition, they provide the best possible blocking across the entire spectral range from UV to IR. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/15 without visible performance loss. Clip-Filter for mirrorless Nikon Z full-frame cameras Mirrorless full-frame Z-series cameras from Nikon are an excellent choice for astrophotography. With Astronomik Clip-Filters, you can use our full range of filters with your camera to capture stunning images. Whether paired with a camera lens or a telescope, our Clip-Filters ensure maximum image quality and performance from your setup. The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers: Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night. All lens functions, such as focus, aperture, and image stabilization remain fully functional. The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass. The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes. Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers: Large filters for large camera lenses are very expensive. Using a filter holder between the camera body and the lens prevents focusing to infinity. For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi “Epsilon” astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed. Long exposure times lead to dust settling on the camera’s sensor chip. Additionally, all Astronomik Nikon Z XL Clip-Filters serve as an excellent dust shield, protecting the sensor during long exposures. If you only need a dust shield without filtering effects, the Astronomik MC-Clear Nikon Z XL Clip-Filter is the right choice. Use Astronomik filters for your Nikon Z full-frame camera and enjoy marvelous images with an ultra light equipment! Compatible Nikon Z full-frame cameras Model Compatibility Nikon Z 5 Nikon Z6 Nikon Z 6II Nikon Z6III Nikon Z7 Nikon Z 7II Nikon Z 8 Nikon Z 9 Nikon Z f Nikon APS-C cameras Non-compatible lenses Model Compatibility Original Nikon Z teleconverter TC-2.0x Technical Data Guaranteed transmission of more than 90% at the H-alpha line (656nm) Typical transmission of 96% at the H-alpha line Full-Width-Half Maximum (FWHM): 12nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters) Finely polished optical glass, free of any striae, residual stresses, and bubbles Extremely scratch-resistant and durable coating Completely resistant against high humidity and aging effects Astronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters) Parfocal with other Astronomik filters Diffraction-limited Optimized spectral windows Delivered in a high-quality, long-lasting filter box Made in Germany Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Thanks to the high-precision machining of the glas substrate, all Astronomik filters are parfocal. The wedge errors are far below all common tolerances. Therefore, all issues concerning focal distances and the exact alignment of images from each color channel are effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR and MaxFR coatings are designed for optimal performance across a wide range of focal ratios of the optics used. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios for best performance of that specific filter.
Astronomik OWB Type 3 XT Clip-Filter Sony alpha 7
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter. Suitability of the Astronomik OWB Type 3 filtersDSLR photography (astro-modified): Very good, restores standard white balance for regular photographyDSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik H-alpha 12nm Clip-Filter EOS R XL
The Astronomik H-alpha filter is ideal for imaging HII regions from both light-polluted and dark observation sites. The Astronomik H-alpha filter significantly enhances the contrast between objects emitting light at 656nm (H-alpha line) and the sky background, allowing for long exposure times for deep and high-contrast images. The filter blocks the emission lines of high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps, the maxima of typical LED lights, most lines of natural airglow, as well as most of the distracting moonlight. The Astronomik H-alpha filter effectively blocks all unwanted light from wavelengths other than 656nm, from ultraviolet (UV) to infrared (IR). The Astronomik H-alpha filter MUST NOT BE USED for solar observation! Difference between Astronomik 12nm, 6nm and 4nm filters The choice between 12nm, 6nm and 4nm Full-Width-Half-Maximum (FWHM) filters depends on your imaging conditions and camera type. There is no universal “best” option - each FWHM serves a specific purpose. The 12nm Astronomik Narrowband-Emissionline filters are optimized for use with system cameras with CMOS sensors. They are also a good choice for CCD cameras with normal or high dark current. The 12nm filters are also the preferred choice for cameras with an integrated or dual guiding sensor, as they show more guiding stars compared to filters with 6nm or 4nm FWHM. The 12nm filters are the most affordable way to get started with Narrowband-Emissionline filters. Usually, the background signal in images taken from suburban or dark-sky locations is limited by the sensor’s dark current rather than light pollution. Therefore, further suppression of the sky background by reducing the FWHM does not reveal more details of the object. The Astronomik MFR coating Both the Astronomik MFR and MaxFR coatings offer extremely high contrast, minimized stray light, no halos and needle-sharp stars. In addition, they provide the best possible blocking across the entire spectral range from UV to IR. 12nm MFR-coated filters can be used in all instruments with aperture ratios from f/3 to f/15 without visible performance loss. Clip-Filters for mirrorless Canon EOS R cameras Canon EOS R series cameras are an excellent choice for astrophotography. With Astronomik Clip-Filters, you can use our full range of filters with your camera to capture stunning images. Whether paired with a camera lens or a telescope, our Clip-Filters ensure maximum image quality and performance from your setup. The Astronomik Clip-Filters offer a number of practical advantages that make them an ideal choice for astrophotographers: Installing and removing the Astronomik Clip-Filter is very quick and easy and requires no extra tools or modifications to the camera body. They can be changed at any time, even at night. All lens functions, such as focus, aperture, and image stabilization remain fully functional. The Astronomik Clip-Filters are held securely in place without stressing the high-quality glass. The Astronomik Clip-Filters are designed and optimized for use with both standard camera lenses and telescopes. Through the Astronomik Clip-Filters, we were able to solve several common issues faced by astrophotographers: Large filters for large camera lenses are very expensive. Using a filter holder between the camera body and the lens prevents focusing to infinity. For very fast telescopes (low f-number) like the Vixen R200SS or the Takahashi “Epsilon” astrograph, a filter drawer or filter wheel can not be used because the distance to the corrector lenses would be changed. Long exposure times lead to dust settling on the camera’s sensor chip. Additionally, all Astronomik EOS R XL Clip-Filters serve as an excellent dust shield, protecting the sensor during long exposures. If you only need a dust shield without filtering effects, the Astronomik MC-Clear EOS R XL Clip-Filter is the right choice. Use Astronomik filters for your Canon EOS R camera and enjoy marvelous images with an ultra-light equipment! NOTE: Please store the Clip-Filter in the supplied storage box and do not leave it in the camera permanently. Compatible Canon EOS R full-frame cameras Model Compatibility Canon EOS R Canon EOS Ra * Canon EOS RP Canon EOS R3 Canon EOS R5 Canon EOS R5 Mark II Canon EOS R6 Canon EOS R6 Mark II Canon EOS R8 * Please note: Canon’s astro-version “Ra” of the R-series shows strong halos around brighter stars, even without any filter. We highly recommend NOT purchasing the Canon EOS Ra. Compatible Canon EOS R APS-C cameras Model Compatibility Canon EOS R7 Canon EOS R10 Canon EOS R50 Canon EOS R50 V Canon EOS R100 Non-compatible Canon lenses Model Compatibility Canon RF 14mm f/1.4 L VCM Canon RF 28mm F2.8 STM Canon RF 35mm F1.8 IS Macro STM Canon RF 85mm F1.2L USM Canon Extender RF 2x Canon Extender RF 1.4x Technical Data Guaranteed transmission of more than 90% at the H-alpha line (656nm) Typical transmission of 96% at the H-alpha line Full-Width-Half Maximum (FWHM): 12nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters) Finely polished optical glass, free of any striae, residual stresses, and bubbles Extremely scratch-resistant and durable coating Completely resistant against high humidity and aging effects Astronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters) Parfocal with other Astronomik filters Diffraction-limited Optimized spectral windows Delivered in a high-quality, long-lasting filter box Made in Germany Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Thanks to the high-precision machining of the glas substrate, all Astronomik filters are parfocal. The wedge errors are far below all common tolerances. Therefore, all issues concerning focal distances and the exact alignment of images from each color channel are effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR and MaxFR coatings are designed for optimal performance across a wide range of focal ratios of the optics used. Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios for best performance of that specific filter.
Astronomik OWB Type 3 Clip-Filter EOS APS-C
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter. Suitability of the Astronomik OWB Type 3 filtersDSLR photography (astro-modified): Very good, restores standard white balance for regular photographyDSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS Clip-Filter Nikon Z XL
The Astronomik CLS filter is designed for photography of nebulae, galaxies, and star clusters using lenses. It completely blocks the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps as well as all lines of natural airglow while allowing the majority of visible light and nebulae emissions to pass through. This enhances the contrast between deep-sky objects and the night sky, making it ideal for photography in light-polluted areas.Due to its wide passband, the Astronomik CLS filter passes a substantial amount of light, minimally dimming stars. The filter is designed to block as much unwanted light as possible while still transmitting the maximum amount of light from astronomical objects.20s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS filter. (Canon EOS 6D astro-modified, ISO 6400, Canon EF24-105mm f/4L IS II USM @ 24mm / f/4)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.AlternativesIf there is no built-in IR cut filter in your camera, a Astronomik CLS CCD filter is required.The Astronomik UHC filter is especially suitable for photography of emission nebulae with strong light pollution.The Astronomik UHC-E filter is better suited for photographing emission nebulae and comets with moderate light pollution.Suitability of the Astronomik CLS filtersCMOS and CCD photography: Good, requires an additional Astronomik IR-Block filterDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Good, requires an additional Astronomik IR-Block filterGallery of images taken with our Astronomik CLS CCD filter (using the Astronomik CLS filter with a respective camera will result in identical images) Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data92% transmission at 486nm (H-beta)92% transmission at 496nm (OIII)92% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 540nm and above 650nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik OWB Type 3 XT Clip-Filter EOS R XL
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter. Suitability of the Astronomik OWB Type 3 filtersDSLR photography (astro-modified): Very good, restores standard white balance for regular photographyDSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS CCD Clip-Filter Sony alpha 7
The Astronomik CLS CCD filter is designed for use with cameras that are intended for astronomical use. It enhances the contrast between all deep-sky objects and the sky background, making it ideal for astrophotography under light polluted skies.Its wider transmission range compared to UHC filters allows a greater amount of light to pass through, resulting in less dimming of stars. The Astronomik CLS CCD filter is optimized to block as much unwanted light as possible while allowing the maximum amount of light from the astronomical objects to pass through. The Astronomik CLS CCD filter completely blocks the emission lines of artificial light sources such as streetlights (e.g. high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps) as well as all lines of natural airglow.The Astronomik CLS CCD filter is suitable for DSLR, CMOS, and CCD cameras and can be used with telescopes or lenses with focal ratios from 1:1.8 to 1:15.The integrated infrared(IR)-blocking layer makes it suitable for use with cameras without their own IR-block filter.30s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS CCD filter. (Canon EOS M3 MC-modified, ISO 1600, Walimex 12/2.0)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.For color images from emission line objects, the Astronomik CLS CCD filter is an excellent choice for the luminance channel.AlternativesFor cameras with an built-in IR cut filter or for visual observation, the Astronomik CLS filter is a more budget-friendly option.Suitability of the Astronomik CLS CCD filtersCMOS and CCD photography: Very good blocking of light-pollutionDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Very good, color balance is close to perfectGallery of images taken with our Astronomik CLS CCD filter Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data95% transmission at 486nm (H-beta)95% transmission at 496nm (OIII)95% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 520nm and 640 to 690nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinionMario Spénard: »I want to thank you for your magnificent CLS-CCD. I am using it with a standard unmodified Nikon D610 in a very light polluted area with some really nice result.«
Astronomik CLS CCD Clip-Filter Nikon Z XL
The Astronomik CLS CCD filter is designed for use with cameras that are intended for astronomical use. It enhances the contrast between all deep-sky objects and the sky background, making it ideal for astrophotography under light polluted skies.Its wider transmission range compared to UHC filters allows a greater amount of light to pass through, resulting in less dimming of stars. The Astronomik CLS CCD filter is optimized to block as much unwanted light as possible while allowing the maximum amount of light from the astronomical objects to pass through. The Astronomik CLS CCD filter completely blocks the emission lines of artificial light sources such as streetlights (e.g. high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps) as well as all lines of natural airglow.The Astronomik CLS CCD filter is suitable for DSLR, CMOS, and CCD cameras and can be used with telescopes or lenses with focal ratios from 1:1.8 to 1:15.The integrated infrared(IR)-blocking layer makes it suitable for use with cameras without their own IR-block filter.30s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS CCD filter. (Canon EOS M3 MC-modified, ISO 1600, Walimex 12/2.0)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.For color images from emission line objects, the Astronomik CLS CCD filter is an excellent choice for the luminance channel.AlternativesFor cameras with an built-in IR cut filter or for visual observation, the Astronomik CLS filter is a more budget-friendly option.Suitability of the Astronomik CLS CCD filtersCMOS and CCD photography: Very good blocking of light-pollutionDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Very good, color balance is close to perfectGallery of images taken with our Astronomik CLS CCD filter Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data95% transmission at 486nm (H-beta)95% transmission at 496nm (OIII)95% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 520nm and 640 to 690nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinionMario Spénard: »I want to thank you for your magnificent CLS-CCD. I am using it with a standard unmodified Nikon D610 in a very light polluted area with some really nice result.«
Astronomik L-2 UV-IR Block Clip-Filter EOS R XL
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block Clip-Filter Sony alpha 7
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS Clip-Filter EOS R XL
The Astronomik CLS filter is designed for photography of nebulae, galaxies, and star clusters using lenses. It completely blocks the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps as well as all lines of natural airglow while allowing the majority of visible light and nebulae emissions to pass through. This enhances the contrast between deep-sky objects and the night sky, making it ideal for photography in light-polluted areas.Due to its wide passband, the Astronomik CLS filter passes a substantial amount of light, minimally dimming stars. The filter is designed to block as much unwanted light as possible while still transmitting the maximum amount of light from astronomical objects.20s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS filter. (Canon EOS 6D astro-modified, ISO 6400, Canon EF24-105mm f/4L IS II USM @ 24mm / f/4)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.AlternativesIf there is no built-in IR cut filter in your camera, a Astronomik CLS CCD filter is required.The Astronomik UHC filter is especially suitable for photography of emission nebulae with strong light pollution.The Astronomik UHC-E filter is better suited for photographing emission nebulae and comets with moderate light pollution.Suitability of the Astronomik CLS filtersCMOS and CCD photography: Good, requires an additional Astronomik IR-Block filterDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Good, requires an additional Astronomik IR-Block filterGallery of images taken with our Astronomik CLS CCD filter (using the Astronomik CLS filter with a respective camera will result in identical images) Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data92% transmission at 486nm (H-beta)92% transmission at 496nm (OIII)92% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 540nm and above 650nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik OWB Type 3 XT Clip-Filter Nikon Z XL
The Astronomik OWB (Original White Balance) Type 3 filter is not a traditional astronomical filter. Instead, it is designed to enable modified DSLR, CCD and CMOS cameras, which have had their inbuilt color correction or infrared (IR) filter removed or replaced, to be used for regular photography. This filter allows a modified DSLR to be used for both astrophotography and everyday photography, eliminating the need to dedicate a camera solely to astronomical tasks.DSLR cameras are modified for astronomical use by removing or substituting the inbuilt color correction filter with one that has a greater transmission of H-alpha light. When doing this, they lose their white balance capability for regular photography. The Astronomik OWB Type 3 filter restores the spectral sensitivity of the modified DSLR to its original range, making the camera functional for everyday photography again. Essentially, the Astronomik OWB Type 3 filter mimics the conventional built-in filter of the camera.The Astronomik OWB Type 3 filter allows the modified camera to work with its pre-set white balance settings, including the automatic white balance (AWB), which is not possible with modified DSLRs without this filter. Suitability of the Astronomik OWB Type 3 filtersDSLR photography (astro-modified): Very good, restores standard white balance for regular photographyDSLR photography (Full Spectrum modified): Very good, restores standard white balance for regular photography Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS CCD Clip-Filter EOS R XL
The Astronomik CLS CCD filter is designed for use with cameras that are intended for astronomical use. It enhances the contrast between all deep-sky objects and the sky background, making it ideal for astrophotography under light polluted skies.Its wider transmission range compared to UHC filters allows a greater amount of light to pass through, resulting in less dimming of stars. The Astronomik CLS CCD filter is optimized to block as much unwanted light as possible while allowing the maximum amount of light from the astronomical objects to pass through. The Astronomik CLS CCD filter completely blocks the emission lines of artificial light sources such as streetlights (e.g. high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps) as well as all lines of natural airglow.The Astronomik CLS CCD filter is suitable for DSLR, CMOS, and CCD cameras and can be used with telescopes or lenses with focal ratios from 1:1.8 to 1:15.The integrated infrared(IR)-blocking layer makes it suitable for use with cameras without their own IR-block filter.30s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS CCD filter. (Canon EOS M3 MC-modified, ISO 1600, Walimex 12/2.0)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.For color images from emission line objects, the Astronomik CLS CCD filter is an excellent choice for the luminance channel.AlternativesFor cameras with an built-in IR cut filter or for visual observation, the Astronomik CLS filter is a more budget-friendly option.Suitability of the Astronomik CLS CCD filtersCMOS and CCD photography: Very good blocking of light-pollutionDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Very good, color balance is close to perfectGallery of images taken with our Astronomik CLS CCD filter Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data95% transmission at 486nm (H-beta)95% transmission at 496nm (OIII)95% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 520nm and 640 to 690nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinionMario Spénard: »I want to thank you for your magnificent CLS-CCD. I am using it with a standard unmodified Nikon D610 in a very light polluted area with some really nice result.«
Astronomik UHC Clip-Filter Nikon Z XL
The Astronomik UHC filter stands out as the first choice for astrophotography, offering enhanced contrast and detail in deep-sky objects that surpasses other filters on the market. With its Ultra High Contrast (UHC) design, the filter allows nearly 100% transmission of OIII and H-beta lines, effectively eliminating scattered light from various sources, including light pollution. This results in a significant enhancement of detail for gaseous and planetary nebulae against the sky background.Designed for versatility, the Astronomik UHC filter is effective in both urban and dark sky conditions, improving contrast for emission nebulae and other celestial objects. It dramatically increases the visibility and detail of objects that are otherwise faint or obscured.The filter's application spans aperture ratios from 1:3 to 1:15, suitable for a wide range of telescopes and lenses. Compared to filters from other manufacturers, the Astronomik UHC filter excels in revealing more stars and finer details in celestial objects, maintaining the sharpness and optical quality expected from high-performance lenses.The filter works by blocking emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps and all lines of natural airglow, while allowing H-beta and OIII lines to pass through. This selective transmission enhances the contrast between the sky background and observed objects.Additionally, the Astronomik UHC filter is recommended for photography of Jupiter's clouds and offers improved separation of double stars. In summary, the Astronomik UHC filter is indispensable for astronomers seeking to maximize visual clarity and contrast in deep-sky photography, making it an essential tool for all deep-sky photographers alike.Other usesThe 1.25" and 2" socket models can be used for visual observation.AlternativesThe Astronomik UHC-E filter is more suitable for photographing comets or when there is less light pollution.We recommend the Astronomik CLS or CLS CCD filter for photographing galaxies and the milky way in moderate light pollution. The Astronomik CLS CCD filter has an additional integrated infrared(IR)-blocking layer.Suitability of the Astronomik UHC filtersCMOS and CCD photography: Good for emission nebulae, requires an additional Astronomik IR-Block filterDSLR photography (original): Good for emission nebulae, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good for emission nebulae, color balance is also goodDSLR photography (MC-modified): Very good for emission nebulae, requires an additional Astronomik IR-Block filterDifference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical dataTypical transmission of 95% at 486nm (H-beta)Typical transmission of 95% at 496nm and 501nm (OIII)Typical transmission of 95% at 656nm (H alpha)Transmission range: 480nm to 505nm and above 645nm Full-Width-Half Maximum (FWHM): 25nmGlass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-2 UV-IR Block Clip-Filter EOS APS-C
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik L-3 UV-IR Block Clip-Filter EOS APS-C
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik UV-IR Block Clip-Filter
Astronomik offers a range of three different ultraviolet (UV) and infrared (IR) blocking filters for the Luminance channel. These filters are designed to help you tune your setup to produce the sharpest, most contrast-rich images possible. The luminance channel is critical to a great final image because it provides the most signal, which means the filter should have the highest transmission possible with a wide spectral bandpass across the entire visible spectrum. This combination ensures the highest sensitivity and photon counts on your pixels.However, not all optical instruments or additional optical elements like correctors, field-flatteners, or reducers have a perfect color correction. A Luminance filter with too wide a bandpass can show chromatic aberration of the optical system, resulting in soft or bloated stars and making image processing difficult. To address this, Astronomik offers its line of Luminance filters: the L-1 filter with the widest spectral window, the L-2 filter with a standard spectral window, and the L-3 filter with the narrowest spectral window.Depending on the color errors of the instruments used, the Astronomik Luminance filter with the widest spectral window should be used.L-1 UV-IR Block filter: Ideal for optical systems free of chromatic aberrationL-2 UV-IR Block filter: Suitable for most optical systems with a corrector or flattenerL-3 UV-IR Block filter: Designed for refractors with less-than-perfect color correction to minimize bluish halos around starsThe transmission characteristics and coatings on the Astronomik Luminance filters are engineered to eliminate halos and reflections. Even with bright stars in the field of view, nebulae and galaxies are imaged with the finest structures and maximum contrast. Additional note for photographers under light-polluted skiesThe Astronomik CLS CCD filter is recommended as a replacement for the Astronomik Luminance filter. The Astronomik CLS CCD filter provides approximately the same amount of light in all three color channels while blocking nearly all unwanted light pollution, resulting in much deeper images with much less background noise from light-polluted observing sites.Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical data Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik ProPlanet 642 BP Clip-Filter EOS R XL
The Astronomik ProPlanet 642 BP filter is the latest addition to the Astronomik ProPlanet infrared (IR)-pass filter series. This filter stands out for its versatility in daylight IR-photography, high-resolution lunar and planetary imaging, and deep-sky astrophotography of H-alpha nebulae."BP" stands for "Bandpass", indicating that the filter operates within a 200nm spectral window from 642nm to 842nm. In contrast to the other two Astronomik ProPlanet filters, it blocks the longer IR wavelengths. Together with the Astronomik ProPlanet 742 and ProPlanet 807 filters, you now have three choices to suit your IR imaging needs.Highlight of the Astronomik ProPlanet 642 BP filter: Three filter in one! The highlight of the Astronomik ProPlanet 642 BP filter is its three-in-one functionality. Depending on the camera used, it serves as an excellent tool for daylight IR-photography, reducing seeing effects and enhancing contrast for lunar and planetary imaging. Additionally, it is an affordable H-alpha filter for those beginning deep-sky astrophotography of H-alpha regions. Extensive testing and development have ensured that this filter performs these tasks optimally, delivering stunning images.1) Daylight IR-photographyContrast-rich images with great color renditionClear "Wood-Effect" imagesNo hot spots from longer IRShort exposure times, similar to normal VIS-imagingPerfect choice for IR-videos2) High-resolution lunar and planetary imagingShort exposure timesEffective reduction of seeing (air turbulence)Enhanced contrast in the red areaNo ghost images and best sharpness due to blocking longer IR3) Deep-sky astrophotography of H-alpha nebulaeMaximal transmission of the H-alpha line at 656nmAbout 40nm Full-Width-Half Maximum (FWHM) with astro-modified DSLRsAmazing contrast under light-polluted skies or moonlightLow-priced filter for getting started in H-alpha imagingEasy focusing using the camera display plus LiveViewGuiding for AstrophotographyInstalling the Astronomik ProPlanet 642 BP filter in front of your autoguider camera dramatically improves guiding quality by minimizing image motion from one frame to the next.The features of the Astronomik ProPlanet 642 BP filter in detail1) Daylight IR-photographyThe development of the Astronomik ProPlanet 642 BP filter started with a focus on daylight IR-imaging using modified DSLR cameras. Normally, unmodified DSLRs have a built-in IR-blocking filter because their sensors are sensitive up to 1100nm. By removing this internal blocking filter through modifications like MC or Full Spectrum, the camera can be used for the fascinating field of IR- photography.The Astronomik ProPlanet 642 BP filter opens in the very deep red spectrum and allows light to pass through up to 842nm. This results in images that are perfect for channel swapping and offer excellent color differentiation in post-processing. The starting wavelength of 642nm combined with blocking longer IR provides particularly contrast-rich images.The following image demonstrates the impressive capabilities of the Astronomik ProPlanet 642 BP filter in IR-photography:Villadeati, a village on the hills of Piedmont (Italy) - Astronomik ProPlanet 642 BP filter compared to an UV-IR Block filter. (c) Domenico RotaDo you use the Astronomik ProPlanet 642 BP filter for daylight IR-photography? Share your best images with us!2) High-resolution lunar and planetary imagingHigh-resolution imaging of the moon and planets is an area of astrophotography that has seen remarkable advancements over the past 20 years. Today, amateurs around the world can capture images that were unimaginable for even the best-equipped professional observatories two decades ago. To engage in this field of astrophotography, you need a low-noise video camera, specialized image-processing software like AstroStakkert, Registax, or AviStack, and an IR-pass filter.Why infrared? Observers are familiar with the flickering of stars and planetary disks when viewed through an eyepiece or on a monitor. This flickering, caused by variations in air temperature and pressure, leads to a phenomenon known as "Seeing." The change in the refractive index of air bubbles, which causes the image to shift, is less pronounced in the IR spectrum than in the visual range, resulting in steadier and clearer images.While human eyes are not sensitive to IR light, CCD and CMOS sensors in modern cameras are. An IR-pass filter, such as the Astronomik ProPlanet 642 BP filter, blocks unwanted visible, short-wave light, allowing only the long-wave, calm IR light to reach the sensor. This greatly improves image sharpness and contrast.The amount of seeing changes very quickly, so there is no universal filter that will work every time. The Astronomik ProPlanet 642 BP filter is the latest addition to a line of products that includes the Astronomik ProPlanet 742 and ProPlanet 807 filters. This filter opens at 642nm and blocks longer IR, making it ideal for nights with relatively good seeing conditions. During its development, testers reported that the Astronomik ProPlanet 642 BP filter produced the best images, outperforming filters from other manufacturers in terms of sharpness and contrast.Thus, the Astronomik ProPlanet 642 BP filter is an essential tool for achieving high-quality, high-resolution lunar and planetary images, providing amateurs with the capability to capture professional-grade astrophotographs.Jupiter with Ganymed (c) Karl ThurnerJupiter with Ganymed (c) Hartwig LuethenDo you use the Astronomik ProPlanet 642 BP filter for lunar and planetary imaging? Share your best images with us!3) Deep-sky astrophotography of H-alpha nebulaeThe Astronomik ProPlanet 642 BP filter achieves nearly 100% transmission at the famous H-alpha line at 656nm. This means that all light from beautiful red H-alpha regions reaches your camera sensor while shorter wavelengths and most artificial light pollution are effectively filtered out. When used with a typical astro-modified DSLR, the filter provides a spectral window of about 40nm, resulting in a very dark background and high contrast. This makes it possible to capture stunning images of H-alpha regions even when the moon is up, as lunar stray light is also filtered out effectively.A common question from customers is, "How much longer do I need to expose with this filter?“. The answer is simple: you don't have to expose longer, but you can if you want to. Due to the high transmission rate of nearly 100%, the same amount of photons with a wavelength of 656nm will reach your sensor regardless of whether the filter is installed. However, with the Astronomik ProPlanet 642 BP filter installed, the sky background will remain very dark, allowing you to expose longer to collect more photons from your target without the background becoming overly bright.While narrowband-emissionline filters like the Astronomik H-alpha filters with 12nm or 6nm bandwidth perform this job even better by blocking more unwanted light, the Astronomik ProPlanet 642 BP filter is a very attractive option for beginners in this field of astrophotography due to its lower price. Additionally, real emission-line filters can be difficult for beginners to use because focusing is challenging with them. With the Astronomik ProPlanet 642 BP filter, there is usually enough light to use the LiveView monitor on your camera, making focusing much easier.Overall, the Astronomik ProPlanet 642 BP filter is the ideal filter for getting started in deep-sky astrophotography of H-alpha nebulae with a modified DSLR, providing excellent transmission, contrast, and ease of use for capturing beautiful deep-sky astrophotographs.California Nebula imaged with a Canon EOS 80D (modified) and Astronomik ProPlanet 642 BP filter (c) Thomas Tomz Henriksen, DenmarkDo you use the Astronomik ProPlanet 642 BP filter for H-alpha imaging? Share your best images with us!Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical dataMore than 95% transmission for wavelengths between 642nm and 840nmBlocking of wavelengths between 350nm and 630nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinion»(...) As expected, the detail resolution with the Astronomik ProPlanet 642 BP filter was unrivalled.(...) We would have needed this filter sooner :-).«
Astronomik ProPlanet 642 BP Clip-Filter Nikon XL
The Astronomik ProPlanet 642 BP filter is the latest addition to the Astronomik ProPlanet infrared (IR)-pass filter series. This filter stands out for its versatility in daylight IR-photography, high-resolution lunar and planetary imaging, and deep-sky astrophotography of H-alpha nebulae."BP" stands for "Bandpass", indicating that the filter operates within a 200nm spectral window from 642nm to 842nm. In contrast to the other two Astronomik ProPlanet filters, it blocks the longer IR wavelengths. Together with the Astronomik ProPlanet 742 and ProPlanet 807 filters, you now have three choices to suit your IR imaging needs.Highlight of the Astronomik ProPlanet 642 BP filter: Three filter in one! The highlight of the Astronomik ProPlanet 642 BP filter is its three-in-one functionality. Depending on the camera used, it serves as an excellent tool for daylight IR-photography, reducing seeing effects and enhancing contrast for lunar and planetary imaging. Additionally, it is an affordable H-alpha filter for those beginning deep-sky astrophotography of H-alpha regions. Extensive testing and development have ensured that this filter performs these tasks optimally, delivering stunning images.1) Daylight IR-photographyContrast-rich images with great color renditionClear "Wood-Effect" imagesNo hot spots from longer IRShort exposure times, similar to normal VIS-imagingPerfect choice for IR-videos2) High-resolution lunar and planetary imagingShort exposure timesEffective reduction of seeing (air turbulence)Enhanced contrast in the red areaNo ghost images and best sharpness due to blocking longer IR3) Deep-sky astrophotography of H-alpha nebulaeMaximal transmission of the H-alpha line at 656nmAbout 40nm Full-Width-Half Maximum (FWHM) with astro-modified DSLRsAmazing contrast under light-polluted skies or moonlightLow-priced filter for getting started in H-alpha imagingEasy focusing using the camera display plus LiveViewGuiding for AstrophotographyInstalling the Astronomik ProPlanet 642 BP filter in front of your autoguider camera dramatically improves guiding quality by minimizing image motion from one frame to the next.The features of the Astronomik ProPlanet 642 BP filter in detail1) Daylight IR-photographyThe development of the Astronomik ProPlanet 642 BP filter started with a focus on daylight IR-imaging using modified DSLR cameras. Normally, unmodified DSLRs have a built-in IR-blocking filter because their sensors are sensitive up to 1100nm. By removing this internal blocking filter through modifications like MC or Full Spectrum, the camera can be used for the fascinating field of IR- photography.The Astronomik ProPlanet 642 BP filter opens in the very deep red spectrum and allows light to pass through up to 842nm. This results in images that are perfect for channel swapping and offer excellent color differentiation in post-processing. The starting wavelength of 642nm combined with blocking longer IR provides particularly contrast-rich images.The following image demonstrates the impressive capabilities of the Astronomik ProPlanet 642 BP filter in IR-photography:Villadeati, a village on the hills of Piedmont (Italy) - Astronomik ProPlanet 642 BP filter compared to an UV-IR Block filter. (c) Domenico RotaDo you use the Astronomik ProPlanet 642 BP filter for daylight IR-photography? Share your best images with us!2) High-resolution lunar and planetary imagingHigh-resolution imaging of the moon and planets is an area of astrophotography that has seen remarkable advancements over the past 20 years. Today, amateurs around the world can capture images that were unimaginable for even the best-equipped professional observatories two decades ago. To engage in this field of astrophotography, you need a low-noise video camera, specialized image-processing software like AstroStakkert, Registax, or AviStack, and an IR-pass filter.Why infrared? Observers are familiar with the flickering of stars and planetary disks when viewed through an eyepiece or on a monitor. This flickering, caused by variations in air temperature and pressure, leads to a phenomenon known as "Seeing." The change in the refractive index of air bubbles, which causes the image to shift, is less pronounced in the IR spectrum than in the visual range, resulting in steadier and clearer images.While human eyes are not sensitive to IR light, CCD and CMOS sensors in modern cameras are. An IR-pass filter, such as the Astronomik ProPlanet 642 BP filter, blocks unwanted visible, short-wave light, allowing only the long-wave, calm IR light to reach the sensor. This greatly improves image sharpness and contrast.The amount of seeing changes very quickly, so there is no universal filter that will work every time. The Astronomik ProPlanet 642 BP filter is the latest addition to a line of products that includes the Astronomik ProPlanet 742 and ProPlanet 807 filters. This filter opens at 642nm and blocks longer IR, making it ideal for nights with relatively good seeing conditions. During its development, testers reported that the Astronomik ProPlanet 642 BP filter produced the best images, outperforming filters from other manufacturers in terms of sharpness and contrast.Thus, the Astronomik ProPlanet 642 BP filter is an essential tool for achieving high-quality, high-resolution lunar and planetary images, providing amateurs with the capability to capture professional-grade astrophotographs.Jupiter with Ganymed (c) Karl ThurnerJupiter with Ganymed (c) Hartwig LuethenDo you use the Astronomik ProPlanet 642 BP filter for lunar and planetary imaging? Share your best images with us!3) Deep-sky astrophotography of H-alpha nebulaeThe Astronomik ProPlanet 642 BP filter achieves nearly 100% transmission at the famous H-alpha line at 656nm. This means that all light from beautiful red H-alpha regions reaches your camera sensor while shorter wavelengths and most artificial light pollution are effectively filtered out. When used with a typical astro-modified DSLR, the filter provides a spectral window of about 40nm, resulting in a very dark background and high contrast. This makes it possible to capture stunning images of H-alpha regions even when the moon is up, as lunar stray light is also filtered out effectively.A common question from customers is, "How much longer do I need to expose with this filter?“. The answer is simple: you don't have to expose longer, but you can if you want to. Due to the high transmission rate of nearly 100%, the same amount of photons with a wavelength of 656nm will reach your sensor regardless of whether the filter is installed. However, with the Astronomik ProPlanet 642 BP filter installed, the sky background will remain very dark, allowing you to expose longer to collect more photons from your target without the background becoming overly bright.While narrowband-emissionline filters like the Astronomik H-alpha filters with 12nm or 6nm bandwidth perform this job even better by blocking more unwanted light, the Astronomik ProPlanet 642 BP filter is a very attractive option for beginners in this field of astrophotography due to its lower price. Additionally, real emission-line filters can be difficult for beginners to use because focusing is challenging with them. With the Astronomik ProPlanet 642 BP filter, there is usually enough light to use the LiveView monitor on your camera, making focusing much easier.Overall, the Astronomik ProPlanet 642 BP filter is the ideal filter for getting started in deep-sky astrophotography of H-alpha nebulae with a modified DSLR, providing excellent transmission, contrast, and ease of use for capturing beautiful deep-sky astrophotographs.California Nebula imaged with a Canon EOS 80D (modified) and Astronomik ProPlanet 642 BP filter (c) Thomas Tomz Henriksen, DenmarkDo you use the Astronomik ProPlanet 642 BP filter for H-alpha imaging? Share your best images with us!Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical dataMore than 95% transmission for wavelengths between 642nm and 840nmBlocking of wavelengths between 350nm and 630nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinion»(...) As expected, the detail resolution with the Astronomik ProPlanet 642 BP filter was unrivalled.(...) We would have needed this filter sooner :-).«
Astronomik CLS Clip-Filter EOS XL
The Astronomik CLS filter is designed for photography of nebulae, galaxies, and star clusters using lenses. It completely blocks the emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps as well as all lines of natural airglow while allowing the majority of visible light and nebulae emissions to pass through. This enhances the contrast between deep-sky objects and the night sky, making it ideal for photography in light-polluted areas.Due to its wide passband, the Astronomik CLS filter passes a substantial amount of light, minimally dimming stars. The filter is designed to block as much unwanted light as possible while still transmitting the maximum amount of light from astronomical objects.20s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS filter. (Canon EOS 6D astro-modified, ISO 6400, Canon EF24-105mm f/4L IS II USM @ 24mm / f/4)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.AlternativesIf there is no built-in IR cut filter in your camera, a Astronomik CLS CCD filter is required.The Astronomik UHC filter is especially suitable for photography of emission nebulae with strong light pollution.The Astronomik UHC-E filter is better suited for photographing emission nebulae and comets with moderate light pollution.Suitability of the Astronomik CLS filtersCMOS and CCD photography: Good, requires an additional Astronomik IR-Block filterDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Good, requires an additional Astronomik IR-Block filterGallery of images taken with our Astronomik CLS CCD filter (using the Astronomik CLS filter with a respective camera will result in identical images) Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data92% transmission at 486nm (H-beta)92% transmission at 496nm (OIII)92% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 540nm and above 650nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik CLS CCD Clip-Filter EOS APS-C
The Astronomik CLS CCD filter is designed for use with cameras that are intended for astronomical use. It enhances the contrast between all deep-sky objects and the sky background, making it ideal for astrophotography under light polluted skies.Its wider transmission range compared to UHC filters allows a greater amount of light to pass through, resulting in less dimming of stars. The Astronomik CLS CCD filter is optimized to block as much unwanted light as possible while allowing the maximum amount of light from the astronomical objects to pass through. The Astronomik CLS CCD filter completely blocks the emission lines of artificial light sources such as streetlights (e.g. high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps) as well as all lines of natural airglow.The Astronomik CLS CCD filter is suitable for DSLR, CMOS, and CCD cameras and can be used with telescopes or lenses with focal ratios from 1:1.8 to 1:15.The integrated infrared(IR)-blocking layer makes it suitable for use with cameras without their own IR-block filter.30s exposures with JPEG data directly from the camera without further processing. Second image taken with the Astronomik CLS CCD filter. (Canon EOS M3 MC-modified, ISO 1600, Walimex 12/2.0)Other usesThe 1.25" and 2" socket models can be used for observations from light-polluted areas.For color images from emission line objects, the Astronomik CLS CCD filter is an excellent choice for the luminance channel.AlternativesFor cameras with an built-in IR cut filter or for visual observation, the Astronomik CLS filter is a more budget-friendly option.Suitability of the Astronomik CLS CCD filtersCMOS and CCD photography: Very good blocking of light-pollutionDSLR photography (original): Good, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good, color balance is close to perfectDSLR photography (MC-modified): Very good, color balance is close to perfectGallery of images taken with our Astronomik CLS CCD filter Difference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical Data95% transmission at 486nm (H-beta)95% transmission at 496nm (OIII)95% transmission at 501nm (OIII)97% transmission at 656nm (H-alpha)Transmission range: 450 to 520nm and 640 to 690nm Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios. Customer opinionMario Spénard: »I want to thank you for your magnificent CLS-CCD. I am using it with a standard unmodified Nikon D610 in a very light polluted area with some really nice result.«
Astronomik MC-Clear Clip-Filter EOS APS-C
The Astronomik MC-(multicoated) Clear filter serves dual purposes: as a dust protector or to maintain the optical depth of your imaging system. Dust protection: The robust coating ensures scratch resistance and durability, making the Astronomik MC-Clear filter the perfect choice for protecting your optics or sensors (e.g. Schmidt-Cassegrain telescopes, Schmidt-Newton telescopes, Maksutov systems, and DSLR cameras) from dust particles and airborne contaminants without affecting the sensitivity of the camera or the eye, altering colors or destroying the optical performance of your system.Parfocality: The Astronomik MC-Clear glass is manufactured to the same high standards as other Astronomik filters, ensuring it is parfocal with other Astronomik filters. This means it can be used interchangeably with other filters without affecting the focus. Additionally, it is multicoated to prevent unwanted reflections and does not block infrared (IR) or ultraviolet (UV) light.Astronomik MC-Clear filter are highly regarded by camera manufacturers worldwide for their superior coating and scratch resistance, available in various custom diameters.Other usesIt is an alternative to the Astronomik IR-Block or UV-IR Block (L-1, L-2, L-3) filters for photography in systems without refracting optical elements, e.g. Newton telescopes.Alternatives Use the Astronomik IR-Block or UV-IR Block (L-1, L-2, L-3) filters for photography in systems with refracting optical elements.Suitability of the Astronomik MC-Clear filtersVisual observation: For dust protection onlyCMOS and CCD photography: Good, to compensate the optical thickness of other Astronomik filters; dust protectionDSLR photography: For dust protection onlyWebcam and video: For dust protection onlyDifference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical dataSuitable for all focal ratiosTypical transmission: 97-99% Glass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.
Astronomik UHC XT Clip-Filter EOS APS-C
The Astronomik UHC filter stands out as the first choice for astrophotography, offering enhanced contrast and detail in deep-sky objects that surpasses other filters on the market. With its Ultra High Contrast (UHC) design, the filter allows nearly 100% transmission of OIII and H-beta lines, effectively eliminating scattered light from various sources, including light pollution. This results in a significant enhancement of detail for gaseous and planetary nebulae against the sky background.Designed for versatility, the Astronomik UHC filter is effective in both urban and dark sky conditions, improving contrast for emission nebulae and other celestial objects. It dramatically increases the visibility and detail of objects that are otherwise faint or obscured.The filter's application spans aperture ratios from 1:3 to 1:15, suitable for a wide range of telescopes and lenses. Compared to filters from other manufacturers, the Astronomik UHC filter excels in revealing more stars and finer details in celestial objects, maintaining the sharpness and optical quality expected from high-performance lenses.The filter works by blocking emission lines from high- and low-pressure sodium (Na)- and mercury (Hg)-vapor lamps and all lines of natural airglow, while allowing H-beta and OIII lines to pass through. This selective transmission enhances the contrast between the sky background and observed objects.Additionally, the Astronomik UHC filter is recommended for photography of Jupiter's clouds and offers improved separation of double stars. In summary, the Astronomik UHC filter is indispensable for astronomers seeking to maximize visual clarity and contrast in deep-sky photography, making it an essential tool for all deep-sky photographers alike.Other usesThe 1.25" and 2" socket models can be used for visual observation.AlternativesThe Astronomik UHC-E filter is more suitable for photographing comets or when there is less light pollution.We recommend the Astronomik CLS or CLS CCD filter for photographing galaxies and the milky way in moderate light pollution. The Astronomik CLS CCD filter has an additional integrated infrared(IR)-blocking layer.Suitability of the Astronomik UHC filtersCMOS and CCD photography: Good for emission nebulae, requires an additional Astronomik IR-Block filterDSLR photography (original): Good for emission nebulae, color balance is shifted but contrast is enhancedDSLR photography (astro-modified): Very good for emission nebulae, color balance is also goodDSLR photography (MC-modified): Very good for emission nebulae, requires an additional Astronomik IR-Block filterDifference between Astronomik standard and XT Clip-FiltersThe new Astronomik XT-Filters are specifically designed for astrophotography with wide-angle lenses, delivering sharp and crisp star images all the way to the edges of the image. When using very short focal length lenses to take widefield images, standard Clip-Filters could introduce aberrations, stretching stars in the outermost corners of the image. To solve this issue, the new Astronomik XT-Filters are coated on an extremely thin substrate of only 0.3mm or 0,5mm thickness, significantly reducing these aberrations. Despite the reduced thickness, the Astronomik XT-Filters maintain the highest optical quality. They are manufactured using the same durable coating technology as all Astronomik filters. More information about our XT-Filters can be found here.Technical dataTypical transmission of 95% at 486nm (H-beta)Typical transmission of 95% at 496nm and 501nm (OIII)Typical transmission of 95% at 656nm (H alpha)Transmission range: 480nm to 505nm and above 645nm Full-Width-Half Maximum (FWHM): 25nmGlass thickness: 1mm (except Astronomik OWB Type 3 and XT filters)Finely polished optical glass, free of any striae, residual stresses, and bubblesExtremely scratch-resistant and durable coatingCompletely resistant against high humidity and aging effectsAstronomik MFR coating (Astronomik Deep-Sky RGB, UV-IR Block L-1, L-2, L-3, and Narrowband-Emissionline filters)Parfocal with other Astronomik filtersDiffraction-limitedOptimized spectral windowsDelivered in a high-quality, long-lasting filter boxDue to the high-precision machining of the carrier substrate, all Astronomik filters are parfocal with wedge errors far below all common tolerances. Astronomik filters are diffraction-limited, ensuring that the optical performance (resolution and contrast) of your telescope is not compromised. Issues concerning focal distances and the exact alignment of images from each color channel are therefore effectively eliminated. All Astronomik filters are ideal for modern cameras, including both CMOS- and CCD-based models, ensuring you capture the best possible images with your equipment. Sharpness, contrast, and the absence of any reflections and halos are guaranteed. Even with bright stars in the field of view, nebulae and galaxies will be captured with the finest structures. The Astronomik MFR coating is designed for optimal performance across a wide range of focal ratios of the optics used.Every Astronomik filter undergoes a rigorous quality control process before delivery. Additionally, each Astronomik Narrowband-Emissionline filter is measured using a high-end PerkinElmer Spectrophotometer to ensure it meets the specifications published on our website. On the back of each Narrowband-Emissionline filter box, you will find a label detailing the precise spectral data for that specific filter, including the maximum transmission and the recommended range of focal ratios.